Semi Auto Chain Feeder 2 Color Printing Die Cutting Carton Box
Making Machine
Feeding unit
This machine adopts chain feeding system, equipped with side gauge
make sure feeding paper accurately.
Abrasion resistance materials as the support of the bottom of
chains, fast running, low noise .
Main motor placed under the feed table.
Equipped with block paper steel bar to ensure the easy feeding of
the bend cardboard.
Feeding error ±1.5mm.
printing unit
Printing roller, paper feeding roller, pressure roller, all the
surfaces grinding, hard chromium plating.
Adopt planet style electrical adjustment of 360 degrees whatever
operating and stopping, quickly and accurately
Electrical separate printing unit and slotting unit ,pneumatic
locking up of printing units
Inking roller can be detached from printing plate automatically to
avoid damage the printing plate.
Inking roller equipped idling running device to prevent ink from
being dried when machine stop.
Pneumatic lifting and down the anilox roller, auto ink
distributing.
With Pneumatic diaphragm pump to supply ink.
Main transmission gears are made by 45#steel after high frequency
quenching.
Drive part adopts spray lubricating system, improve the precision
and serve life of machine.
Manual adjustment of the printing roll axial position 10mm.
Printing precision±0.50 ㎜(when the paper board is plane and
smooth).
Auto count device properly controls production volume.
slotting unit
The slotting knives pedestal can be worm-type adjustment according
to the thickness of card board. ( Three & Five layer only).
The slitting knives pedestal can be worm-type adjustment according
to the thickness of card board. ( Three & Five layer only).
The back slotting knife (Height of the box) Four knives adjustment
synchronous, easy working.
Electric adjustment Printing phase and slotting position.
7mm alloy steel slotting knives with indent heat treatment to
enable grinding teeth sharp edge
Main Technology Parameter
| Model | BYKM1224 |
| Roller diameter | 480 |
| Max sheet size(mm) | 1400*2000 |
| Max printing size(mm) | 1400*1800 |
| Min sheet size(mm) | 350×500 |
| Working speed( pcs/min) | 0-60 |
| Printing precision(mm) | ±0.5 |
| Standard plate thickness(mm) | 6 |
| Sheet thickness(mm) | 2-10mm |
| Power (kw) |
11.0kw |
| Wallboard thickness(mm) |
40mm |
